SDSHobby
SINGLE-AXIS SHOCK ABSORPTION CAMERA GIMBAL FOR BUMBLEBEE ST550
| Support for pitch and roll two-axis rotation | the pitch angle |
Features:, Total weight:, 100g (include servo), 45, the roll angle:±, Maximum payload:, 110mmx75mm (, Application:, Suitable for Bumblebee ST550 RC quadcopter,
It is made by 1.2mm of carbon fiber board and ...SDSHobby
U-MANIFOLD ALUMINUM EXHAUST PIPE/BENT PIPE L80MM/ D16MM FOR NITRO ENGINE 21-25A
Application Fields:, RC Boat Nitro Engine 21-25A, Specification:, L1=80mm,
D1=16mm D2=24mmSDSHobby
U-MANIFOLD EXHAUST PIPE/BENT PIPE L53MM/ D16MM FOR NITRO ENGINE 21-25A
Application Fields:, RC Boat Nitro Engine 21-25A, Specification:, L1=53mm,
D1=16mmSDSHobby
CESSNA 310 EPO/ FOAM ELECTRIC AIRPLANE RTF WITH RETRACTABLE LANDING GEAR, 2.4G RIGHT HAND THROTTLE
| Wing Span | 1280mm |
| Fuselage Length | 1100mm |
| Wing Loading | 58g/ sq.dm. |
| Flying Weight | 1200g |
| RC System | 2.4G 5 CH |
| Servo | 4-6pcs Micro-Servo |
| ESC | Brushless 30A*2pcs |
| Fuselage Material | EPO |
Specifications:, Battery:, 3S 11.1V 2200mAh 25C Li-Po, Package Contents:,
Cessna 310 EPO Electric Airplane RTF Servo 4-6pcs Micro-Servo 3S ...SDSHobby
CESSNA 310 EPO/ FOAM ELECTRIC AIRPLANE RTF WITH RETRACTABLE LANDING GEAR, 2.4G LEFT HAND THROTTLE
| Wing Span | 1280mm |
| Fuselage Length | 1100mm |
| Wing Loading | 58g/ sq.dm. |
| Flying Weight | 1200g |
| RC System | 2.4G 5 CH |
| Servo | 4-6pcs Micro-Servo |
| ESC | Brushless 30A*2pcs |
| Fuselage Material | EPO |
Specifications:, Battery:, 3S 11.1V 2200mAh 25C Li-Po, Package Contents:,
Cessna 310 EPO Electric Airplane RTF Servo 4-6pcs Micro-Servo 3S ...SDSHobby
EXTREME BRUSHLESS MOTOR CHECKER
Specifications:, Input Voltage:, 7.4V-8.6V (Suggested using a 7.4V 2S1P Li-Po Battery), LCD Display Screen:, blue backlight background, white text, 16 characters*2 lines, Dimension:, 136.5*80.6*47mm, Net Weight:, 90g, Supported Motor:, sensor or sensor-less brushless motor, Standard 540 Size RC Car Motor:, .5 Turn or Over, 2 Poles in-runner Motor, Flight Motor:, Support Sensor-Less Brushless Motor, 6 Poles out-runner Motor Current Drawn Less Than 18A at 8.4V Without Loading, Features:,
n n Brushless Motor Checking n KV Measurement n RPM ...SDSHobby
DYNAM BRUSHLESS ESC-50A FOR MODEL AIRPLANES
| Cont. Current | 50A |
| Burst Current (>10s) | 80A |
| BEC Model | switch |
| BEC Output | 5V/3A |
| Cells of Li-Po/Li-ion | 2S-6S |
| Cells of Ni-Cd/Ni-MH | 5S-18S |
| User Programmable | yes |
| Weight | 60g |
| L*W*H (Size) | 70*31*14mm |
| Balance Discharger Protection | N/A |
Specifications:, Features:, Programmable Items:, Ø, Brake Setting:, Enabled / Disabled, default is disabled, Battery Type:, Li-xx (Li-ion or Li-poly) / Ni-xx (Ni-MH or NiCd), default is Li-xx., :, Soft Cut-Off (Gradually reduce the output power) or Cut-Off (Immediately stop the output power). Default is Soft Cut-Off., :, Low / Medium / High, default is Medium., For lithium batteries, the number of battery cells is calculated automatically. Low / medium / high cutoff voltage for each cell is: 2.6V/2.85V/3.1V. For example: For a 3 cells lithium pack, when “Medium” cutoff threshold is set, the cut-off voltage will be: 2.85*3=8.55V., For nickel batteries, low / medium / high cutoff voltages are 0%/45%/60% of the startup voltage (i.e. the initial voltage of battery pack), and 0% means the low voltage cut-off function is disabled. For example: For a 10 cells Ni-MH battery, fully charged voltage is 1.44*10=14.4V, when “Medium” cut-off threshold is set, the cut-off voltage will be: 14.4*45%=6.5V., When using balance discharge monitoring and protection function(i.e. Plugging the balance charge connector on battery pack into the BDMP socket on the Guard series ESC, the ESC monitors not only the voltage of the whole battery pack but also the voltage of each cell). For lithium battery, low / medium / high cut off voltage for each cell is: 2.6V/2.85V/3.1V. When the voltage of any cell in battery pack is lower than the cut-off threshold, the protection function activated., Startup Mode:, Normal / Soft /Super-Soft, default is Normal., Timing:, Low / Medium / High, default is Low. (Note2), Note2:, After changing the timing setting, please test your RC model on ground prior to flight!,
Net Speed controllers for brushless motors are designed for best ...SDSHobby
DYNAM BRUSHLESS ESC-70A FOR MODEL AIRPLANES
| Cont. Current | 70A |
| Burst Current (>10s) | 100A |
| BEC Model | switch |
| BEC Output | 5V/3A |
| Cells of Li-Po/Li-ion | 2S-6S |
| Cells of Ni-Cd/Ni-MH | 5S-18S |
| User Programmable | yes |
| Weight | 62g |
| L*W*H (Size) | 70*31*14mm |
| Balance Discharger Protection | N/A |
Specifications:, Features:, Programmable Items:, Ø, Brake Setting:, Enabled / Disabled, default is disabled, Battery Type:, Li-xx (Li-ion or Li-poly) / Ni-xx (Ni-MH or NiCd), default is Li-xx., :, Soft Cut-Off (Gradually reduce the output power) or Cut-Off (Immediately stop the output power). Default is Soft Cut-Off., :, Low / Medium / High, default is Medium., For lithium batteries, the number of battery cells is calculated automatically. Low / medium / high cutoff voltage for each cell is: 2.6V/2.85V/3.1V. For example: For a 3 cells lithium pack, when “Medium” cutoff threshold is set, the cut-off voltage will be: 2.85*3=8.55V., For nickel batteries, low / medium / high cutoff voltages are 0%/45%/60% of the startup voltage (i.e. the initial voltage of battery pack), and 0% means the low voltage cut-off function is disabled. For example: For a 10 cells Ni-MH battery, fully charged voltage is 1.44*10=14.4V, when “Medium” cut-off threshold is set, the cut-off voltage will be: 14.4*45%=6.5V., When using balance discharge monitoring and protection function(i.e. Plugging the balance charge connector on battery pack into the BDMP socket on the Guard series ESC, the ESC monitors not only the voltage of the whole battery pack but also the voltage of each cell). For lithium battery, low / medium / high cut off voltage for each cell is: 2.6V/2.85V/3.1V. When the voltage of any cell in battery pack is lower than the cut-off threshold, the protection function activated., Startup Mode:, Normal / Soft /Super-Soft, default is Normal., Timing:, Low / Medium / High, default is Low. (Note2), Note2:, After changing the timing setting, please test your RC model on ground prior to flight!,
Net Speed controllers for brushless motors are designed for best ...SDSHobby
DYNAM BRUSHLESS ESC-60A FOR MODEL AIRPLANES
| Cont. Current | 60A |
| Burst Current (>10s) | 80A |
| BEC Model | switch |
| BEC Output | 5V/3A |
| Cells of Li-Po/Li-ion | 2S-6S |
| Cells of Ni-Cd/Ni-MH | 5S-18S |
| User Programmable | yes |
| Weight | 60g |
| L*W*H (Size) | 70*31*14mm |
| Balance Discharger Protection | N/A |
Specifications:, Features:, Programmable Items:, Ø, Brake Setting:, Enabled / Disabled, default is disabled, Battery Type:, Li-xx (Li-ion or Li-poly) / Ni-xx (Ni-MH or NiCd), default is Li-xx., :, Soft Cut-Off (Gradually reduce the output power) or Cut-Off (Immediately stop the output power). Default is Soft Cut-Off., :, Low / Medium / High, default is Medium., For lithium batteries, the number of battery cells is calculated automatically. Low / medium / high cutoff voltage for each cell is: 2.6V/2.85V/3.1V. For example: For a 3 cells lithium pack, when “Medium” cutoff threshold is set, the cut-off voltage will be: 2.85*3=8.55V., For nickel batteries, low / medium / high cutoff voltages are 0%/45%/60% of the startup voltage (i.e. the initial voltage of battery pack), and 0% means the low voltage cut-off function is disabled. For example: For a 10 cells Ni-MH battery, fully charged voltage is 1.44*10=14.4V, when “Medium” cut-off threshold is set, the cut-off voltage will be: 14.4*45%=6.5V., When using balance discharge monitoring and protection function(i.e. Plugging the balance charge connector on battery pack into the BDMP socket on the Guard series ESC, the ESC monitors not only the voltage of the whole battery pack but also the voltage of each cell). For lithium battery, low / medium / high cut off voltage for each cell is: 2.6V/2.85V/3.1V. When the voltage of any cell in battery pack is lower than the cut-off threshold, the protection function activated., Startup Mode:, Normal / Soft /Super-Soft, default is Normal., Timing:, Low / Medium / High, default is Low. (Note2), Note2:, After changing the timing setting, please test your RC model on ground prior to flight!,
Net Speed controllers for brushless motors are designed for best ...SDSHobby
DYNAM BRUSHLESS ESC-40A FOR MODEL AIRPLANES
| Cont. Current | 40A |
| Burst Current (>10s) | 55A |
| BEC Model | switch |
| BEC Output | 5V/3A |
| Cells of Li-Po/Li-ion | 2S-6S |
| Cells of Ni-Cd/Ni-MH | 5S-18S |
| User Programmable | yes |
| Weight | 35g |
| L*W*H (Size) | 55*28*12mm |
| Balance Discharger Protection | N/A |
Specifications:, Features:, Programmable Items:, Ø, Brake Setting:, Enabled / Disabled, default is disabled, Battery Type:, Li-xx (Li-ion or Li-poly) / Ni-xx (Ni-MH or NiCd), default is Li-xx., :, Soft Cut-Off (Gradually reduce the output power) or Cut-Off (Immediately stop the output power). Default is Soft Cut-Off., :, Low / Medium / High, default is Medium., For lithium batteries, the number of battery cells is calculated automatically. Low / medium / high cutoff voltage for each cell is: 2.6V/2.85V/3.1V. For example: For a 3 cells lithium pack, when “Medium” cutoff threshold is set, the cut-off voltage will be: 2.85*3=8.55V., For nickel batteries, low / medium / high cutoff voltages are 0%/45%/60% of the startup voltage (i.e. the initial voltage of battery pack), and 0% means the low voltage cut-off function is disabled. For example: For a 10 cells Ni-MH battery, fully charged voltage is 1.44*10=14.4V, when “Medium” cut-off threshold is set, the cut-off voltage will be: 14.4*45%=6.5V., When using balance discharge monitoring and protection function(i.e. Plugging the balance charge connector on battery pack into the BDMP socket on the Guard series ESC, the ESC monitors not only the voltage of the whole battery pack but also the voltage of each cell). For lithium battery, low / medium / high cut off voltage for each cell is: 2.6V/2.85V/3.1V. When the voltage of any cell in battery pack is lower than the cut-off threshold, the protection function activated., Startup Mode:, Normal / Soft /Super-Soft, default is Normal., Timing:, Low / Medium / High, default is Low. (Note2), Note2:, After changing the timing setting, please test your RC model on ground prior to flight!,
Net Speed controllers for brushless motors are designed for best ...SDSHobby
DYNAM BRUSHLESS ESC-30A FOR MODEL AIRPLANES
| Cont. Current | 30A |
| Burst Current (>10s) | 40A |
| BEC Model | switch |
| BEC Output | 5V/3A |
| Cells of Li-Po/Li-ion | 2S-4S |
| Cells of Ni-Cd/Ni-MH | 5S-12S |
| User Programmable | yes |
| Weight | 25g |
| L*W*H (Size) | 45*24*11mm |
| Balance Discharger Protection | N/A |
Specifications:, , Features:, Programmable Items:, Ø, Brake Setting:, Enabled / Disabled, default is disabled, Battery Type:, Li-xx (Li-ion or Li-poly) / Ni-xx (Ni-MH or NiCd), default is Li-xx., :, Soft Cut-Off (Gradually reduce the output power) or Cut-Off (Immediately stop the output power). Default is Soft Cut-Off., :, Low / Medium / High, default is Medium., For lithium batteries, the number of battery cells is calculated automatically. Low / medium / high cutoff voltage for each cell is: 2.6V/2.85V/3.1V. For example: For a 3 cells lithium pack, when “Medium” cutoff threshold is set, the cut-off voltage will be: 2.85*3=8.55V., For nickel batteries, low / medium / high cutoff voltages are 0%/45%/60% of the startup voltage (i.e. the initial voltage of battery pack), and 0% means the low voltage cut-off function is disabled. For example: For a 10 cells Ni-MH battery, fully charged voltage is 1.44*10=14.4V, when “Medium” cut-off threshold is set, the cut-off voltage will be: 14.4*45%=6.5V., When using balance discharge monitoring and protection function(i.e. Plugging the balance charge connector on battery pack into the BDMP socket on the Guard series ESC, the ESC monitors not only the voltage of the whole battery pack but also the voltage of each cell). For lithium battery, low / medium / high cut off voltage for each cell is: 2.6V/2.85V/3.1V. When the voltage of any cell in battery pack is lower than the cut-off threshold, the protection function activated., Startup Mode:, Normal / Soft /Super-Soft, default is Normal., Timing:, Low / Medium / High, default is Low. (Note2), Note2:, After changing the timing setting, please test your RC model on ground prior to flight!,
Net Speed controllers for brushless motors are designed for best ...SDSHobby
DYNAM BRUSHLESS ESC-25A FOR MODEL AIRPLANES
| Cont. Current | 25A |
| Burst Current (>10s) | 35A |
| BEC Model | switch |
| BEC Output | 5V/3A |
| Cells of Li-Po/Li-ion | 2S-4S |
| Cells of Ni-Cd/Ni-MH | 5S-12S |
| User Programmable | yes |
| Weight | 22g |
| L*W*H (Size) | 45*24*11mm |
| Balance Discharger Protection | N/A |
Specifications:, Features:, Programmable Items:, Ø, Brake Setting:, Enabled / Disabled, default is disabled, Battery Type:, Li-xx (Li-ion or Li-poly) / Ni-xx (Ni-MH or NiCd), default is Li-xx., :, Soft Cut-Off (Gradually reduce the output power) or Cut-Off (Immediately stop the output power). Default is Soft Cut-Off., :, Low / Medium / High, default is Medium., For lithium batteries, the number of battery cells is calculated automatically. Low / medium / high cutoff voltage for each cell is: 2.6V/2.85V/3.1V. For example: For a 3 cells lithium pack, when “Medium” cutoff threshold is set, the cut-off voltage will be: 2.85*3=8.55V., For nickel batteries, low / medium / high cutoff voltages are 0%/45%/60% of the startup voltage (i.e. the initial voltage of battery pack), and 0% means the low voltage cut-off function is disabled. For example: For a 10 cells Ni-MH battery, fully charged voltage is 1.44*10=14.4V, when “Medium” cut-off threshold is set, the cut-off voltage will be: 14.4*45%=6.5V., When using balance discharge monitoring and protection function(i.e. Plugging the balance charge connector on battery pack into the BDMP socket on the Guard series ESC, the ESC monitors not only the voltage of the whole battery pack but also the voltage of each cell). For lithium battery, low / medium / high cut off voltage for each cell is: 2.6V/2.85V/3.1V. When the voltage of any cell in battery pack is lower than the cut-off threshold, the protection function activated., Startup Mode:, Normal / Soft /Super-Soft, default is Normal., Timing:, Low / Medium / High, default is Low. (Note2), Note2:, After changing the timing setting, please test your RC model on ground prior to flight!,
Net Speed controllers for brushless motors are designed for best ...SDSHobby
DYNAM BRUSHLESS ESC-18A FOR MODEL AIRPLANES
| Cont. Current | 18A |
| Burst Current (>10s) | 22A |
| BEC Model | switch |
| BEC Output | 5V/3A |
| Cells of Li-Po/Li-ion | 2S-4S |
| Cells of Ni-Cd/Ni-MH | 5S-12S |
| User Programmable | yes |
| Weight | 19g |
| L*W*H (Size) | 45*24*11mm |
| Balance Discharger Protection | N/A |
| means the low voltage cut-off function is disabled. For example | For |
| when “Medium” cut-off threshold is set, the cut-off voltage will be | 14.4*45%=6.5V. |
Specifications:, Features:, Programmable Items:, Ø, Brake Setting:, Enabled / Disabled, default is disabled, Battery Type:, Li-xx (Li-ion or Li-poly) / Ni-xx (Ni-MH or NiCd), default is Li-xx., :, Soft Cut-Off (Gradually, :Low / Medium /, For lithium batteries, the number of battery cells is calculated automatically. Low / medium / high cutoff voltage for each cell is: 2.6V/2.85V/3.1V. For example: For a 3 cells lithium pack, when “Medium” cutoff threshold is set, the cut-off voltage will be: 2.85*3=8.55V., battery, low / medium / high cut off voltage for each cell is:, .6V/2.85V/3.1V. When the voltage of any cell in battery pack is lower, Startup Mode:, Normal / Soft /Super-Soft, default is Normal., Timing:, Low / Medium / High, default is Low. (Note2), Note2:, After changing the timing setting, please test your RC model,
Net Speed controllers for brushless motors are designed for best ...SDSHobby
FUTABA 60CELL CHARGER SWITCH KITS FOR RECEIVER L25CM
| Application | RC airplanes, especially for gas engine |
Specifications:,
D0.8mm 60cell lead wire High tensile resistant, small resistance Gold ...